Skip to main content
‹ ›
  • OM45PM_R_S_Left
  • OM45PM_picto
  • OM45PM_R_S_Centre
  • OM45PM_R_S_Right

OM 45PM

4 ½ - DIGIT PROCESS MONITOR

Typ OM 45PM is an inexpensive, low built 4 ½ digit panel process monitor.
Thanks to its dimensions the instrument is suitable for mosaic panel mounting applications.

  • 4 ½ - digit projection
  • range: 0…5 mA; 0…20 mA; 4…20 mA; ±2 V; ±5 V; ±10 V
  • size of DIN 96 x 24 mm
  • power supply 10…24 VDC or 230 VAC

 

Input
PM
Range
0…5 mA
< 500 mV
0…20 mA
< 500 mV
4…20 mA
< 500 mV
±2 V
1 MOhm
±5 V
1 MOhm
±10 V
1 MOhm
Projection
Display range
±19999, single-coloured 7-segment LED
Display height
14 mm
Display colour
red, green
Decimal point
adjustable by a short-circuit connector
Display brightness
adjustable by a trimmer under the front panel
Settings
Control
The device is designed for simple measurement without further control
The display can be adjusted within the range of ± 10% for both extr. positions by the trimmers under the front panel
Instrument accuracy and functionality
Temperature coefficient
100 ppm/°C
Accuracy
±0,15 % of range + 1 digit
Rate
1,2/2,5/5/10 measur./s
Overload capacity
2x; 10x (t < 30 ms)
Calibration
at 25°C and 40 % r.h.
Power supply
Power supply
12…24 VDC/max, 2,3 W, non-isolated
250 VAC/50 Hz, ±10 %, 2,5 VA
Power supply protection
Power supply is protected by a fuse inside the instrument
Mechanical properties
Dimensions
96 x 24 x 100 mm (w x h x d)
Panel cutout
90,5 x 21,5 mm (w x h)
Material
Noryl GFN2 SE1, non-inflammable UL 94 V-I
Operating conditions
Connection
connector terminal board, cable section < 2,5 mm2
Stabilization period
within 15 minutes after switch on
Operating temperature
0°…60°C
Storage temperature
-10°…85°C
Protection class
IP40 (front panel only)
El. safety
EN 61010-1, A2
Dielectric strength
2,5 kVAC within 1 min. between pow. supply and input
Insulation resistance
for polution degree II, measuring cat. III.
AC power supply 670 V (ZI), 300 V (Di)*
DC power supply, input 300 V (ZI), 150 V (Di)*
EMC
EN 61326-1
Images
Dimensions and installation
Connection
To assemble the order, first select the desired instrument configuration.
OM 45PM-???
Power supply
Any
?
Any
?
230 VAC/50 Hz
1
12...24 VDC, non isolated
2
Measuring range
Any
?
Any
?
0...5 mA
A
0...20 mA
B
4...20 mA
C
±2 V
D
±5 V
E
±10 V
F
On request
Z
Display color
Any
?
Any
?
Red
1
Green
2
Selected combination is invalid
For the selected combination there are no devices in stock