Skip to main content
‹ ›
  • OMX103_S_Centr
  • OMX103UNI_picto

OMX 103UNI

UNIVERSAL ISOLATED TRANSMITTER • UNI > U/I/F

The OMX 103 model series are programmable DIN rail mountable transmitters, designed for maximum efficiency and user comfort while keeping their favourable price.
Type OMX 103UNI is a multifunctional two-input instrument with the possibility of 8 input configurations easily adjustable in the instrument´s menu.
The instrument is based on a single-chip microcontroller with 24-bit A/D converter, which ensures good accuracy, stability and easy operation of the instrument. As a standard the instrument is fitted with a backlit LCD display, enabling clear projection of measured values and configuration settings.

  • multifunction input (DC, PM, RTD, T/C, DU)
  • output: 0…5/20 mA/4…20 mA
    0…2/5/10 V/±10 V/10…10 100 Hz
  • digital filters, tare, mathematicNCTIONS
  • galvanic isolation: 2,5 kVAC
  • DIN rail mounting
  • width 35 mm
  • power supply 10…30 V AC/DC or 80…250 V AC/DC

Options

  • comparators

  • data output

  • measured value record

 

 

Input
*
Number of inputs
2 inputs, isolated
DC
Range
menu selectable
±60 mV
> 10 MOhm
Input 3
±150 mV
> 10 MOhm
Input 3
±300 mV
> 10 MOhm
Input 3
±1200 mV
> 10 MOhm
Input 3
PM
Range
menu selectable
OHM
Range
menu selectable
0…100 Ohm
0…1 kOhm
0…10 kOhm
0…30 kOhm (only for 2 or 4-wire connection)
Connection
2, 3 or 4-wire
RTD
Type
menu selectable
EU > 100/500/1 000 Ohm s 3 850 ppm/°C
-50°…450°C
RU > 50 Ohm s 3 910 ppm/°C
-200°…1 100°C
RU > 100 Ohm s 3 910 ppm/°C
-200°…450°C
US > 100 Ohm s 3 920 ppm/°C
-50°…450°C
Connection
2, 3 or 4-wire
Ni
Type
menu selectable
Ni 1 000/10 000 s 5 000 ppm/°C
-50°…250°C
Ni 1 000/10 000 s 6 180 ppm/°C
-50°…250°C
Cu
Type
menu selectable
Cu 50/100 with 4 260 ppm/°C
-50°…200°C
Cu 50/100 with 4 280 ppm/°C
-200°…200°C
Projection
Display
LCD displey with backlight
Display range
-99m…999M
Number of characters
2x 3 characters + 2x 3 characters (description)
Display height
4,5 mm
Signalizing LED
1, 2 Limits L1, L2 (red)
T Tare (green)
M Min./Max. value (green)
Decimal point
menu adjustable - fixed or floating
Settings
Control
The instrument is controlled and set by two buttons on the front panel
Menu
LIGHT contains only items necessary for basic device settings with password access
PROFI Full device settings with password access
USER User menu of any item, selected from LIGHT/PROFI. Access without password.
OM Link
Company communication interface for operation, setting and update of device firmware (microUSB)
Instrument accuracy and functionality
Temperature coefficient
50 ppm/°C
Accuracy
±0,15 % of range + 1 digit
±0,3 % of range + 1 digit (T/C)
±0,6 % of range + 1 digit (T/C-B)
Accuracy of cold junction measurement
±1,5°C
Rate
0,5…80 measur./s
Overload capacity
2x; 10x (t < 30 ms)
Wire compensation (RTD, OHM)
< 30 Ohm
Cold junction compensation
adjustable -20°…99°C, automatic
Linearization
linear interpolation in 177 points (only via OM Link)
Digital filters
arithmetic mean from 2…100 measurements
floating mean from 2…30 measurements
exponential mean from 2…100 measurements
rounding setting projection step for display
Functions
Tare designed to reset display on non-zero input signal
Fixed tare preset fixed tare
Min/max value registration of min./max. value achieved during measurement
Peak value display shows only max. or min. values
Teach-in semiautomatic regime of input calibration
Math. functions
polynom, 1/x, logarithm, exponential, power, root, sin x
Math. operations between inputs
sum, difference, product, and quotient
Watch-dog
reset after 20 ms
Calibration
at 25°C and 40 % r.h.
Comparators
Number of
2/4/6 output
Type
Digital, menu adjustable, contact connect. < 50 ms
Mode
Hysteresis switch. point, hysteresis band "Mez ± 1/2 Hys." and time (0 ... 99.9 s) determ. switching delay
From-To output interval ON and OFF
Dose period, its multiples and time (0 ... 99.9 s), during which the output is active
Error output switching signals error status
Output
2x relay, switch-over contact (250 VAC/50 VDC, 3 A)
2x open collector (30 VDC/100 mA)
Analogue outputs
Number of outputs
4 outputs, isolated
Type
Isolated, programmable with a 16-bit D / A converter, type and range are menu selectable
Temperature coefficient
15 ppm/°C
Nonlinearity
±0,1 % of range
Rate
response to value change < 1 ms
Ranges
0...2 V, 0...5 V, 0...10 V, ±10 V, 0...5 mA, 0...20 mA, 4...20 mA
Compensation
600 Ohm/12 V
Error state
at range of 4...20mA
error message indication (<3.0 mA)
Detection of current loop interruption
Data outputs
Number of outputs
up to 2 outputs
Protocol
ASCII, MODBUS - RTU, PROFIBUS DP
Data format
8 bits + no parity + 1 stop bit (ASCII)
Rate
600…230 400 Baud
0,0096…12 MBaud (PROFIBUS)
RS 232
isolated
RS 485
isolated, addressing max. 31 instruments
Sensor excitation
Fixed
24 VDC/40 mA
Power supply
Power supply
10…30 V AC/DC, ±10 %, PF > 0,4, I < 40 A/1 ms, isolated
80…250 V AC/DC, ±10 %, PF > 0,4, I < 40 A/1 ms, isolated
Current draw
< 9,4 W/9,2 VA
Mechanical properties
Dimensions
35 x 98 x 113 mm (w x h x d)
Material
PA 66, non-inflammable UL 94 V-I (blue)
Installation
DIN rail, width 35 mm
Operating conditions
Connection
connector terminal board, cable section < 1,5/2,5 mm2
Stabilization period
within 5 minutes after switch on
Operating temperature
-20°…60°C
Storage temperature
-20°…85°C
Protection class
IP20
El. safety
EN 61010-1, A2
Dielectric strength
4 kVAC within 1 min. between pow. supply and input
4 kVAC within 1 min. between input and relay output
3,75 kVAC within 1 min. between input and analogue output
3,75 kVAC within 1 min. between output
Insulation resistance
for polution degree II, measuring cat. III.
power supply 600 V (ZI), 300 V (Di)*
output, output, PN 600 V (ZI), 250 V (Di)*
EMC
EN 61326-1
Images
Dimensions and installation
To assemble the order, first select the desired instrument configuration.
OMX 103UNI-???-???-??-??
Power supply
Any
?
Any
?
10...30 V AC/DC
0
80...250 V AC/DC
1
No. of inputs
Any
?
Any
?
Single input
A
Two inputs
B
Analogue output
Any
?
Any
?
No
0
Yes
1
Data recording
Any
?
Any
?
No
0
Yes
1
Specification
Any
??
Any
??
Standard
00
Contromat ltd. - mat. funkce, only přednastavení
01
Special execution current relay hungary 86-C01
02
Selected combination is invalid
For the selected combination there are no devices in stock