OMX 39W
OMX 39W
ISOLATED TRANSMITTER • POWER CONSUMPTION > U/I
The OMX 39 model series are inexpensive and simple DIN rail mountable analog transmitters. Type OMX 39W is a transmitter for galvanic separation and measurement of power consumption. The transmitters have galvanic separation with insulation voltage of 600 V. They are therefore suitable as primary insulation for a majority of industrial applications.
-
input: 0…60 mV ~ 300 mV; 0…120 V ~ 450 V; 0…5 mA ~ 5 A
-
output: 0…5 mA, 0…20 mA, 4…20 mA, ±20 mA
0…2 V, 0…5 V, 0…10 V, ±10 V -
galvanic isolation: 3,75 kVAC
-
width 22 mm
-
DIN rail mounting
-
power supply 10…30 V AC/DC or 80…250 V AC/DC
Input
W
Range
fixed fixed
0…120 V
1 MOhm
Input U
0…150 V
1 MOhm
Input U
0…250 V
1 MOhm
Input U
0…450 V
1 MOhm
Input U
0…60 mV
< 400 mV
Input I
0…150 mV
< 400 mV
Input I
0…300 mV
< 400 mV
Input I
0…1 A
< 400 mV
Input I
0…5 A
< 400 mV
Input I
Input frequency
40…2 500 Hz
Settings
Control
The device is designed for simple measurement without further control
By trimmers, accessible from the front of the transducer, you can adjust the output signal within the range of ±10 %
By trimmers, accessible from the front of the transducer, you can adjust the output signal within the range of ±10 %
Instrument accuracy and functionality
Temperature coefficient
50 ppm/°C
Accuracy
0,5 % of range
Rate
Continuous measurement
Overload capacity
2x; 10x (t < 30 ms) - not for > 300 V and 5 A
Calibration
at 25°C and 40 % r.h.
Analogue outputs
Type
Isolated, fixed setting
Temperature coefficient
50 ppm/°C
Rate
response to value change < 1 s
Ranges
0...2 V, 0...5 V, 0...10 V, ±10 V (minimum load 1 kOhm), 0...5 mA, 0...20 mA, 4...20 mA, ±20 mA
Compensation
600 Ohm/12 V
Power supply
Power supply
10…30 V AC/DC, ±10 %, PF > 0,4, I < 40 A/1 ms, isolated
80…250 V AC/DC, ±10 %, PF > 0,4, I < 40 A/1 ms, isolated
80…250 V AC/DC, ±10 %, PF > 0,4, I < 40 A/1 ms, isolated
Current draw
< 2,4 W/2,6 VA
Power supply protection
Power supply is protected by a fuse inside the instrument
Operating conditions
Connection
connector terminal board, cable section < 2,5 mm2
Stabilization period
within 5 minutes after switch on
Operating temperature
-20°…60°C
Storage temperature
-20°…80°C
Protection class
IP20
El. safety
EN 61010-1, A2
Dielectric strength
4 kVAC within 1 min. between pow. supply and input
4 kVAC within 1 min. between pow. supply and analogue output
3,75 kVAC within 1 min. between input and analogue output
4 kVAC within 1 min. between pow. supply and analogue output
3,75 kVAC within 1 min. between input and analogue output
Insulation resistance
for polution degree II, measuring cat. III.
| power supply | 600 V (ZI), 300 V (Di)* |
| input, output, PN | 500 V (ZI), 250 V (Di)* |
EMC
EN 61326-1
Mechanical properties
Material
PA 66, non-inflammable UL 94 V-I (blue)
Dimensions
22 x 98 x 113 mm (w x h x d)
Installation
DIN rail, width 35 mm
Images
Connection
Dimensions and installation
Datasheets
User manuals
| File name | File type | Version | Language | Download |
|---|---|---|---|---|
|
Operating instructions OMX39
Návod OMX39
|
PDF
|
2009.1.0 |
|
Download |
|
Návod OMX39
Operating instructions OMX39
|
PDF
|
2008.1.0 |
|
Download |
Certificates
| File name | File type | Version | Language | Download |
|---|---|---|---|---|
|
Certificate EU_Declaration_OMX39
Certifikát EU_Prohlaseni_OMX39
|
PDF
|
2022 |
|
Download |
|
Certificate Declaration_17050_OMX39
Certifikát Prohlaseni_17050_OMX39
|
PDF
|
2022 |
|
Download |
|
Certificate Seismic_test_OMX39
Certifikát Seizmicka_zkouzka_OMX39
|
PDF
|
2015 |
|
Download |