Products with signal RS
Isolated digital transmitter RS 485 / PROFIBUS
The transmitter is designed for easy and cost-effective connection of ORBIT MERRET™ instruments to PROFIBUS line with installation to DIN rail. One device can control up to 31 instruments via the RS 485 line with communication protocol OM ASCII.
A modular architecture was chosen for the OMC 8000 PLC series. The core of the PLC is the main module, to which expansion modules up to 31 can be connected. These can be located in close proximity or remotely. The distance between the farthest modules can be up to 40 m. Communication between the modules is ensured by the CAN line. However, with the growing number of modules, it is necessary to take into account the growing demands on communication between them.
Paperless recorder
The device is intended for most technologies and operations where it is necessary to display and record a large number of different electrical or non-electrical quantities in one location. Versatility and a favorable price determine this device to meet most, if not all, of your requirements, including the front panel with IP64 protection.
6 - digit Data Display
Type OM 602RS is a 6-digit data display from serial lines RS 232/485 with protocole ASCII, MESSBUS, PROFIBUS DP, and MODBUS - RTU. The instrument is based on a single-chip microcontroller, which ensures good accuracy, stability and easy operation of the instrument.
6 - digit Data Display RS 485
Type OML 643RS is a 6-digit data display device for data projection from serial line RS 485 with a box depth of only 30 mm. The instrument is based on a single-chip microcontroller, which ensures good accuracy, stability and easy operation of the instrument.
4 - digit Data Display
The OMM 323RS is a 4-digit data display for data projection from serial line RS 485.
The instrument is based on a single-chip microprocessor, which ensures good accuracy, stability and easy operation of the instrument.
4 digit Data Display RS 485
OMM 335RS is a 4 digit data display from the serial line RS 485.
The instrument is based on a microcontroller, which ensures good accuracy and easy operation of the instrument. The 22 mm cross-section of the circular instrument body allows its convenient mounting into mosaic and signalling panels.
MODULE - 2x RS 485 + 1x RS 232/485 + 5x Digial input
Combined digital data module of two RS 485, one RS 232/485 and five digital inputs.
4/6 - digit Data Display
The OMD 202 model series are large programmable displays designed for indoor and outdoor use with IP64 cover.
Type OMD 202RS is a data display from serial lines RS 232/485 with protocole ASCII, MESSBUS, PROFIBUS DP, MODBUS - RTU and PROFINET.
The instrument is based on a single-chip microcontroller with a multichannel 24-bit sigma-delta converter, which ensures good accuracy, stability and easy operation of the instrument.
Displays are suitable for projection of measured data in production lines and operations with legibility up to 80 m.
PROFIBUS
The data communication plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanically isolated output.
The card must be placed in position B5. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
PROFINET
The data communication plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanically isolated output.
The card must be placed in position B5. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.